(2020-02-11, 02:37 PM)seandepagnier Wrote: Can you plug the weather sensors into the usb port of a computer and see the serial stream of nmea0183 at 38400 baud?
To plug into tinypilot you should use a usb otg adaptor to plug into the micro usb port of the pi zero.
Hi Sean, I used the otg adaptor that you supplied but I've ordered another one just in case. I've tried 3 usb cables so definitely not that. I'll plug the vane into my pc to see if it's transmitting data.
Plugged vane into usb port of laptop and get the following so I'm guessing cable is fine, could be the otg:-
$ARMWV,288.91,R,10.51,N,A*11
$ARMWV,288.97,R,9.67,N,A*2a
$ARMWV,288.97,R,9.67,N,A*2a
$ARMWV,288.99,R,9.67,N,A*24
$ARMDA,,,1.00033,B,,,,,,,,,,,,,,,,*36
$ARMTA,26.56,C*21
$ARMWV,288.99,R,9.67,N,A*24
$ARMDA,,,1.00033,B,,,,,,,,,,,,,,,,*36
$ARMTA,26.56,C*21
$ARMWV,288.99,R,9.67,N,A*24
$ARMDA,,,1.00033,B,,,,,,,,,,,,,,,,*36
$ARMTA,26.56,C*21
$ARMWV,288.99,R,9.67,N,A*24
$ARMDA,,,1.00033,B,,,,,,,,,,,,,,,,*36
$ARMTA,26.56,C*21
$ARMWV,288.97,R,9.67,N,A*2a