2019-07-22, 03:37 AM
If it says N/A on the lcd, then the compass is not even working. Make sure you have inertial sensors on i2c. It's normal to see n/a for a second or so at startup.
To get gps or wind, you need to either plug one of these into usb of the raspberry running tinypilot, or send them over wifi. The easiest way is with a connection from opencpn (which gets wind/gps somehow) to tcp port 20220. Make sure to check "output on this port"
To get gps or wind, you need to either plug one of these into usb of the raspberry running tinypilot, or send them over wifi. The easiest way is with a connection from opencpn (which gets wind/gps somehow) to tcp port 20220. Make sure to check "output on this port"