2019-07-28, 04:18 PM
Many of the instability issues that I have encountered were due to an imperfect power distribution. The low voltage indicator on the RPi would come on a few times every minute, and that was enough to cause various problems. I also noticed the RPi wanted to receive about 5.1 volts to be happy, so on the high side of its input voltage range.
My system is much more stable now that I made power wiring short, use thicker wiring, and use an externally powered USB hub to off-load the on-board USB plugs. It’s powered through a power bank with 2.1 Amp output.
My system is much more stable now that I made power wiring short, use thicker wiring, and use an externally powered USB hub to off-load the on-board USB plugs. It’s powered through a power bank with 2.1 Amp output.