This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Output from ocpn to N2K
#4
(2019-11-03, 12:02 PM)Celestine Wrote:
(2019-11-03, 08:07 AM)tkurki Wrote: Yes, the version is old; 6.14.1
I renamed the direcory. OP still fails to start but the errors are different. See below.
Are there a way to roll back the failed install of signalk-nmea2000 ?
I don't think there is an easy way back. Furthermore my advice was (pun intended) ill advised: this is an older OpenPlotter installation and the directory /home/pi/.config/signalk-server-node/node_modules/ contains the server's libraries, not libraries for the plugins. I am not familiar enough with the way OpenPlotter used to install SK server to be able to offer much help.

For the latest server to work you must upgrade Node.js to version 10, but that won't be enough, as some of the libraries have been installed for Node 6 and will not work with a newer one.

Essentially the easiest way out is to reinstall SK Server, but I can't help you out with how to do that in OpenPlotter 1. Maybe somebody else here can?
Reply


Messages In This Thread
Output from ocpn to N2K - by Celestine - 2019-11-02, 04:44 PM
Output from ocpn to N2K - by tkurki - 2019-11-03, 08:07 AM
RE: Output from ocpn to N2K - by Celestine - 2019-11-03, 12:02 PM
RE: Output from ocpn to N2K - by tkurki - 2019-11-03, 08:09 PM
RE: Output from ocpn to N2K - by Celestine - 2019-11-04, 10:46 AM
RE: Output from ocpn to N2K - by Celestine - 2019-11-16, 06:05 PM
RE: Output from ocpn to N2K - by jim321 - 2019-11-04, 01:02 PM
RE: Output from ocpn to N2K - by Celestine - 2019-11-17, 08:23 PM
RE: Output from ocpn to N2K - by verkerkbr - 2019-12-16, 11:31 AM
RE: Output from ocpn to N2K - by Celestine - 2019-12-19, 04:22 PM
RE: Output from ocpn to N2K - by verkerkbr - 2019-12-19, 04:56 PM
RE: Output from ocpn to N2K - by Celestine - 2019-12-19, 05:29 PM
RE: Output from ocpn to N2K - by verkerkbr - 2019-12-20, 12:19 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)