2020-01-23, 11:30 AM
Hello!
I did some testing with the latest image 2020-01-13-OpenPlotter-Moitessier-HAT-v2.0.img and with different Raspberry Pi (Pi 4, Pi 3+, Pi 3) and Moitessier HAT versions (P770010E05, P770010E04, P770010E02). All tests were performed with the same SD card and image.
P770010E05 = Moitessier HAT 2
P770010E04 = latest revision of Moitessier HAT 1
Everything worked as expected.
I did the following steps:
1.) downloaded 2020-01-13-OpenPlotter-Moitessier-HAT-v2.0.img
2.) flashed SD card (Transcend Premium TS32GUSDCU1, 32Gbyte)
3.) booted system (Moitessier HAT not attached)
4.) updated system incl. latest kernel version 4.19.93
5.) shutdown system
6.) attached Moitessier HAT 2
7.) checked communication cat /dev/moitessier.tty
Repeated steps 5 to 7 with all Pi and HAT combinations.
No need to enable/disable any functionality in the raspi config.
Regards,
Thomas
I did some testing with the latest image 2020-01-13-OpenPlotter-Moitessier-HAT-v2.0.img and with different Raspberry Pi (Pi 4, Pi 3+, Pi 3) and Moitessier HAT versions (P770010E05, P770010E04, P770010E02). All tests were performed with the same SD card and image.
P770010E05 = Moitessier HAT 2
P770010E04 = latest revision of Moitessier HAT 1
Everything worked as expected.
I did the following steps:
1.) downloaded 2020-01-13-OpenPlotter-Moitessier-HAT-v2.0.img
2.) flashed SD card (Transcend Premium TS32GUSDCU1, 32Gbyte)
3.) booted system (Moitessier HAT not attached)
4.) updated system incl. latest kernel version 4.19.93
5.) shutdown system
6.) attached Moitessier HAT 2
7.) checked communication cat /dev/moitessier.tty
Repeated steps 5 to 7 with all Pi and HAT combinations.
No need to enable/disable any functionality in the raspi config.
Regards,
Thomas