2020-02-06, 08:17 PM
(This post was last modified: 2020-02-06, 08:20 PM by jamos.tan@gmail.com.)
Thanks!
The default values for this is:
SHUNT_OHMS = 0.1
MAX_EXPECTED_AMPS = 0.3
But I changed them too 0.01 and 10 because of an extra shunt to measure more current in my setup:
SHUNT_OHMS = 0.01
MAX_EXPECTED_AMPS = 10
The default values for this is:
SHUNT_OHMS = 0.1
MAX_EXPECTED_AMPS = 0.3
But I changed them too 0.01 and 10 because of an extra shunt to measure more current in my setup:
SHUNT_OHMS = 0.01
MAX_EXPECTED_AMPS = 10