2020-02-21, 09:36 PM
(2020-02-13, 07:38 PM)xfactor99 Wrote:(2020-02-13, 07:12 PM)Baltic Sailor Wrote: I need help to get the Tiny Pilot connected to the Openplotter.
Have the Tiny Pilot working in stand alone. Can get to the Tinypilot via Web (198.162.14.1). Processor Raspberry PI3b
The Open Plotter has two WLans one for the Headless (VMC) and one for the Web. Can get to Pypilot (192.168.14.1) Processor Raspberry PI 4
I know, that I have to configure the rest (Pyilot settings , Signal K etc.). My Gps is on a Usb port. Just don’t Know how to do it. Some hints would be welcome (bang my head....)
Thanks
Frank
To start the easy thing is to use one of the WLAN´s of OP to connect to the Tinypilot.
Get the IP of the WLAN you have connected. (shoud be 192.168.14.1)
Open OpenCPN in OP and set the Pypilot-plugin to that IP.
Mybe later you want the Tinypilot set as an Client and connect it to the OP-Accesspoint I think it is your VMC
Greetings
Andreas
Thanks!
Got the tiny plotter going!
But I find it hard to change it to a client. Once I've changed it to client (using web interface) its lost. Cant fint it, it won't connect, can't ping it...
Any clue?
/ Ola