2020-02-17, 05:00 PM
pressure-check works in 2.0.7 but the problem is that if you have set the pressure in I2C app, both apps start fighting for controlling the device. If moitessier app wins, you will get data when pressure-check but the I2C app stops working. This has to be solved in I2C, thanks to point me to this. I think we should disable this pressure-check button when the sensor has been set in I2C app to avoid these problems.
Same for the serial-check you propose. It only would work if the serial connection has not been set on any other app.
Same for the serial-check you propose. It only would work if the serial connection has not been set on any other app.