2020-05-12, 07:29 AM
Good morning,
Finally i'm making step forward to the configuration.
Now it seem i have a porblem with the cable from the instrument to the converter.
As i pay no so little money for the cable i have some question before trying some solutions.
What happen
I check the electricity with a tester and there's some result in the data cable with changing values. This mean that some signal is arriving.
In the 12 volt cable (the red one) there isn't electricity, and the converter doesn't work
If i move the connector on the autohelm side the converter start working and data flows.
So i supposed the problem is with the contact of the 12 volts in the connector.
Is it correct?
Question:
Can i take the 12 volts from another source (instrument panel i.e.) directly without changing the connection from the autohelm or I'm going to damage the converter?
I try to find another 3 pin round plug to change directly the one in the cable but i can't find a compatible one. Anyone knows what kind of plug is?
Inviato dal mio ANE-LX2 utilizzando Tapatalk
Finally i'm making step forward to the configuration.
Now it seem i have a porblem with the cable from the instrument to the converter.
As i pay no so little money for the cable i have some question before trying some solutions.
What happen
I check the electricity with a tester and there's some result in the data cable with changing values. This mean that some signal is arriving.
In the 12 volt cable (the red one) there isn't electricity, and the converter doesn't work
If i move the connector on the autohelm side the converter start working and data flows.
So i supposed the problem is with the contact of the 12 volts in the connector.
Is it correct?
Question:
Can i take the 12 volts from another source (instrument panel i.e.) directly without changing the connection from the autohelm or I'm going to damage the converter?
I try to find another 3 pin round plug to change directly the one in the cable but i can't find a compatible one. Anyone knows what kind of plug is?
Inviato dal mio ANE-LX2 utilizzando Tapatalk