2020-03-05, 03:45 PM
It seems SigK doesn't forward the $GPGSV sentence. I have been unable to find a way to do this to provide the data to the Ocpn 5.0 Dashboard GPS Status display.
Only way I can display this info is to add a connection in cpn directly to the serial device & filter just this sentence in the receive filter.
Seems to work fine but of course the OP2 Serial App is covered in red as I now have two connections to the serial port. The cpn connection is set as input only, so not trying to write through both.
Do folks think is an ok solution or am I heading for a fall
Thanks Paul
Only way I can display this info is to add a connection in cpn directly to the serial device & filter just this sentence in the receive filter.
Seems to work fine but of course the OP2 Serial App is covered in red as I now have two connections to the serial port. The cpn connection is set as input only, so not trying to write through both.
Do folks think is an ok solution or am I heading for a fall
Thanks Paul