Checked "settings.json" - there was an entry but it was: ""
Deleted the line, made no difference after a restart.
Found this setup info:
https://opencpn.org/wiki/dokuwiki/doku.p...signalk:a6
which seems to show you do need the convertor plugin, also suggests a UDP NMEA0183 Sender Plugin could do the job.
Confused now....
Just looking again at the Instrument Panel WebApp & it shows the wrong longitude, lat is correct
In the Telnet stream it's 00055.1925,W which is as shown in Cpn, the Inst Panel shows W 000.91988
Tried the UDP Plugin, couldn't get that working either.
Paul
Deleted the line, made no difference after a restart.
Found this setup info:
https://opencpn.org/wiki/dokuwiki/doku.p...signalk:a6
which seems to show you do need the convertor plugin, also suggests a UDP NMEA0183 Sender Plugin could do the job.
Confused now....
Just looking again at the Instrument Panel WebApp & it shows the wrong longitude, lat is correct
In the Telnet stream it's 00055.1925,W which is as shown in Cpn, the Inst Panel shows W 000.91988
Tried the UDP Plugin, couldn't get that working either.
Paul