2020-06-18, 10:15 PM
In the "Convert Signal K to NMEA0183" plugin the AIS related NMEA strings AIVDM, AIVDO are not available! why not?
Scenario: RPI4 - Moitessier hat2 (with AIS simualtion enabled for testing)
- local (rpi) Op5.0 shows AIS movements in northern Adriatic (BTW I am very grateful for this simulation function ITS GREAT FOR TESTING - thanks a lot!)
- OP 5.1 connected via Wlan on 10.10.10.1:10110 shows AIS movement
BUT
- Navionics connected to same wlan does not receive the AIS data, neither on port 10110 nor after further tests on port 2000
I suspect that issue is caused by SignalK not passing on the AIxxx messages.
Scenario: RPI4 - Moitessier hat2 (with AIS simualtion enabled for testing)
- local (rpi) Op5.0 shows AIS movements in northern Adriatic (BTW I am very grateful for this simulation function ITS GREAT FOR TESTING - thanks a lot!)
- OP 5.1 connected via Wlan on 10.10.10.1:10110 shows AIS movement
BUT
- Navionics connected to same wlan does not receive the AIS data, neither on port 10110 nor after further tests on port 2000
I suspect that issue is caused by SignalK not passing on the AIxxx messages.