2020-04-25, 12:04 AM
My BMP180 was woking (and still is) on the OP1.2 but I cant get it to work on the OP2 I2C, it is recognized as a MS5607-02BA03 but it just provides constant (always the same, does not change no matter the environment condition) (non sense) values to the feed (a negative pressure and absurd temperature)
Sailoog, write know, to have pressure/temp readings the easy way would be to buy a BME280, is that it?
ps: When I say still is, I just swap uSD cards back an forth on the very same rpi3 with no mods to the hardware connections.
Sailoog, write know, to have pressure/temp readings the easy way would be to buy a BME280, is that it?
ps: When I say still is, I just swap uSD cards back an forth on the very same rpi3 with no mods to the hardware connections.