2020-07-21, 02:47 PM
(2020-06-03, 11:21 AM)ottow Wrote:(2020-06-01, 08:48 PM)seandepagnier Wrote: By default nmea input is on port 20220 tcp. You can also set a nmea client with host and port which is a tcp client. udp is not supported right now.
I see. Thanks for confirming.
A follow-up on this; I've bought and installed a NMEA4WIFI bridge, and am now trying to get Tinypilot to read the NMEA stream which I've confirmed is available on the assigned TCP port.
NMEA4WIFI (and many other NMEA bridges) can't initiate the connection to a client IP, they depend on the client connecting and reading the data stream on the assigned TCP port at the bridge.
How can I get Tinypilot to do this?