2020-06-04, 07:27 PM
Got a little more related to this.
Loaded new image of tinypilot.
Very worthwhile.
Still get wrong address sometimes. Logs indicated it being the access point but like to see a dump of the network traffic and that's challenging to do in this environment. Tinypilot is the only client with the problem.
One thing I did find is when tinypilot renews it's dhcp lease it looses networking for a while.
This causes problems.
I changed the lease time to 24 hours, the max I can set from 10 minutes.
At least will have issues less often.
Am using kplex to connect pypilot to my nmea router.
It would loose connection and it would drop out of wind or gps.
Set kplex to persist so hopefully it will continue anyway.
Anyhow I suggest lengthening the lease time on your access point if you use tinypilot as a wifi client.
As I recall others are reporting loosing connections occasionally.
Loaded new image of tinypilot.
Very worthwhile.
Still get wrong address sometimes. Logs indicated it being the access point but like to see a dump of the network traffic and that's challenging to do in this environment. Tinypilot is the only client with the problem.
One thing I did find is when tinypilot renews it's dhcp lease it looses networking for a while.
This causes problems.
I changed the lease time to 24 hours, the max I can set from 10 minutes.
At least will have issues less often.
Am using kplex to connect pypilot to my nmea router.
It would loose connection and it would drop out of wind or gps.
Set kplex to persist so hopefully it will continue anyway.
Anyhow I suggest lengthening the lease time on your access point if you use tinypilot as a wifi client.
As I recall others are reporting loosing connections occasionally.