2020-06-06, 10:02 PM
The latest Raspbian kernel has a bug with I2C management. Until this is fixed do not upgrade the kernel. Update just openplotter apps and dependencies but do not run "sudo apt upgrade" or the kernel will be upgraded.
If you want to back to life and updated kernel edit the file /boot/config.txt in your SD and remove this line:
dtoverlay=i2c-gpio,i2c_gpio_sda=2,i2c_gpio_scl=3,bus=3
The system will boot but the Moitessier driver cannot be installed without that line.
If you want to back to life and updated kernel edit the file /boot/config.txt in your SD and remove this line:
dtoverlay=i2c-gpio,i2c_gpio_sda=2,i2c_gpio_scl=3,bus=3
The system will boot but the Moitessier driver cannot be installed without that line.