2020-06-19, 12:52 PM
I use the DC converter to power the USB hub. I am using a USB SSD. All grounds, except for the USB hub which has a 5v and ground terminal on the DC converter, are led to a grounding block on the fuse block.
Things to try:
--Unplug all the USB 3 devices and plug them into the USB 2 ports.
--remove the SSD and boot from the SD card.
--ferrite rings on the power wires.
I won't be able to work on my project till Sunday. I'll post results then. Thanks for all the suggestions.
Things to try:
--Unplug all the USB 3 devices and plug them into the USB 2 ports.
--remove the SSD and boot from the SD card.
--ferrite rings on the power wires.
I won't be able to work on my project till Sunday. I'll post results then. Thanks for all the suggestions.