This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BME280 temperature not convertin to NMEA
#4
(2020-06-30, 09:54 AM)baltika_no_9 Wrote:
(2020-06-29, 10:31 PM)serh11 Wrote: Maybe SignalK path for temperature should be something like environment.outside.temperature (instead of environment.inside.nineveh.temperature), in order for XDR sentence to be generated and populated over NMEA channels, including OpenCPN connection

Maybe you're right although I'm not sure why that should be. The signal K data is definitely present as I can take data from the path environment.inside.nineveh.temperature and display it on a guage in node red. Perhaps as you suggest the conversion to nmea only works for predefined paths?

Many thanks

Use environment.outside.temperature & it will work.
Reply


Messages In This Thread
RE: BME280 temperature not convertin to NMEA - by Lazzz - 2020-06-30, 10:03 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)