2020-07-28, 08:18 AM
(2020-07-28, 07:27 AM)holgerw Wrote: Test in the Terminal for gpsd is running and connected:
gpsmon
it should show some gps data. if not check the baudrate or your hardware-hat.
signal k gets the data from gpsd, so this is the second step to check if the first works.
gpsmon never seem to fully load, I only get this :
tcp://localhost:2947 JSON slave driver>
(82) {"class":"VERSION","release":"3.17","rev":"3.17","proto_major":3,"proto_minor":12}
(32) {"class":"DEVICES","devices":[]}
(122) {"class":"WATCH","enable":true,"json":false,"nmea":false,"raw":2,"scaled":false,"timing":false,"split24":false,"pp
s":true}
From the spec, the hat is outputting 9600baudrate. I've just booted a vanilla instance of Raspian and I get the gps data. So there's something on the OP config somewhere...