[SOLVED] false connection error in "check system"

[PaddyB]

Unfortunately, not all data so far accessed via nmea 0183 from the SignalK server is directly accessible via the SignalK protocol...
It's a bit strange and surprising...

I have no idea how to provide ONLY the sequence "GSV" from the GNSS receiver, especially since the conversion with the plugin "SignalK-to-NMEA0183" does not include this sequence to choose from... Turn on the plugin-converter (SK->nmea0183) with no any sequences marked?

https://www.cruisersforum.com/forums/sho...ost3202164

Signalk doesn't decode GSV nmea messages into sigK data. Messages which are decoded automatically are here >
https://github.com/SignalK/signalk-parser-nmea0183
GSV NMEA messages received by signalk server on a connection get sent straight out again on port 10110, no point in using the sigk-nmea converter, the message is there already. If you want the dashboard to receive those then you can set up a tcp connection in opencpn as well as the sigK connection  to just receive GSV messages on tcp port 10110, the dash will then display the sat data.