2020-10-04, 03:13 PM
try to install in SK: plugin "signalk to nmea2000" from here you define which sk data should be send to 2000.
you will need to activate GPS. normaly it goes per network to UDP 10110 but you also are able to define an serial CAN device to send your data to the CAN-Bus.
report us, if this works for you.
holger
you will need to activate GPS. normaly it goes per network to UDP 10110 but you also are able to define an serial CAN device to send your data to the CAN-Bus.
report us, if this works for you.
holger