2020-10-08, 08:21 AM
The fact is that I use a Moitessier 1 with an Rpi 3A+ and it works great. It always resets OK and never fails. And I've done over 100 restarts in a row to make sure.
The HAT Moitessier has a not negligible energy consumption, which together with the consumption of the same Rpi could be important. If the power source is not powerful enough or stable enough it could have problems loading the HAT driver and produce those random errors.
For the other part, I can confirm that the software and the Hat 1 are working correctly so it must be a problem specific to your installation-configuration.
The HAT Moitessier has a not negligible energy consumption, which together with the consumption of the same Rpi could be important. If the power source is not powerful enough or stable enough it could have problems loading the HAT driver and produce those random errors.
For the other part, I can confirm that the software and the Hat 1 are working correctly so it must be a problem specific to your installation-configuration.