This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Moitessier Hat and signal K not connecting consistently
#5
(2020-10-08, 05:05 PM)serh11 Wrote: Does Signalk reports any errors communicating with Moitesser on the Dashboard page?
Could you run in terminal this command:

head -n 50 /dev/moitessier.tty

and post it's output here?

Hi Sorry for the delay.

I just uninstalled and reinstalled the drivers after several reboot attempts did not restore the mhat signal k connection. It is currently working and here is the output

pi@openplotter:~ $ head -n 50 /dev/moitessier.tty
$GNGLL,4313.6314,N,08154.9043,W,173122.000,A,D*57
$GPTXT,01,01,02,ANTSTATUS=OK*3B
$GNRMC,173123.000,A,4313.6314,N,08154.9043,W,0.00,100.81,151020,,,D,V*14
$GPVTG,100.81,T,,M,0.00,N,0.00,K,D*30
$GPGGA,173123.000,4313.6314,N,08154.9043,W,2,18,0.67,189.2,M,-34.7,M,,*5C
$GNGSA,A,3,29,23,24,18,27,10,15,13,20,,,,1.10,0.67,0.87,1*0A
$GNGSA,A,3,68,82,83,67,69,76,,,,,,,1.10,0.67,0.87,2*0C
$GNGSA,A,3,13,03,08,,,,,,,,,,1.10,0.67,0.87,3*04
$GPGSV,3,1,11,18,82,222,47,15,64,058,47,20,58,301,49,23,55,298,49,0*62
$GPGSV,3,2,11,24,33,141,44,13,30,048,34,44,29,225,35,10,26,283,38,0*63
$GPGSV,3,3,11,27,18,315,32,29,11,195,28,05,04,091,35,0*5C
$GLGSV,3,1,09,83,68,250,32,68,63,299,43,67,44,039,35,82,34,182,19,1*7D
$GLGSV,3,2,09,84,26,329,17,69,19,255,28,77,17,084,,76,13,032,32,1*70
$GLGSV,3,3,09,78,01,131,,1*4C
$GAGSV,2,1,07,08,80,037,41,13,70,210,44,07,44,239,,26,39,311,,0*75
$GAGSV,2,2,07,03,26,054,36,15,25,158,,25,04,063,,0*49
$GNGLL,4313.6314,N,08154.9043,W,173123.000,A,D*56
$GPTXT,01,01,02,ANTSTATUS=OK*3B
$GNRMC,173124.000,A,4313.6314,N,08154.9043,W,0.00,100.81,151020,,,D,V*13
$GPVTG,100.81,T,,M,0.00,N,0.00,K,D*30
$GPGGA,173124.000,4313.6314,N,08154.9043,W,2,18,0.67,189.2,M,-34.7,M,,*5B
$GNGSA,A,3,29,23,24,18,27,10,15,13,20,,,,1.10,0.67,0.87,1*0A
$GNGSA,A,3,68,82,83,67,69,76,,,,,,,1.10,0.67,0.87,2*0C
$GNGSA,A,3,13,03,08,,,,,,,,,,1.10,0.67,0.87,3*04
$GPGSV,3,1,11,18,82,222,47,15,64,058,47,20,58,301,49,23,55,298,49,0*62
$GPGSV,3,2,11,24,33,141,44,13,30,048,33,44,29,225,35,10,26,283,38,0*64
$GPGSV,3,3,11,27,18,315,32,29,11,195,28,05,04,091,35,0*5C
$GLGSV,3,1,09,83,68,250,32,68,63,299,43,67,44,039,35,82,34,182,19,1*7D
$GLGSV,3,2,09,84,26,329,17,69,19,255,27,77,17,084,,76,13,032,32,1*7F
$GLGSV,3,3,09,78,01,131,,1*4C
$GAGSV,2,1,07,08,80,037,41,13,70,210,44,07,44,239,,26,39,311,,0*75
$GAGSV,2,2,07,03,26,054,36,15,25,158,,25,04,063,,0*49
$GNGLL,4313.6314,N,08154.9043,W,173124.000,A,D*51
$GPTXT,01,01,02,ANTSTATUS=OK*3B
$GNRMC,173125.000,A,4313.6314,N,08154.9043,W,0.00,100.81,151020,,,D,V*12
$GPVTG,100.81,T,,M,0.00,N,0.00,K,D*30
$GPGGA,173125.000,4313.6314,N,08154.9043,W,2,17,0.74,189.2,M,-34.7,M,,*57
$GNGSA,A,3,23,24,18,27,10,15,13,20,,,,,1.24,0.74,0.99,1*0B
$GNGSA,A,3,68,82,83,67,69,76,,,,,,,1.24,0.74,0.99,2*06
$GNGSA,A,3,13,03,08,,,,,,,,,,1.24,0.74,0.99,3*0E
$GPGSV,3,1,11,18,82,222,47,15,64,058,47,20,58,301,50,23,55,298,49,0*6A
$GPGSV,3,2,11,24,33,141,44,13,30,048,33,44,29,225,35,10,26,283,38,0*64
$GPGSV,3,3,11,27,18,315,32,29,11,195,28,05,04,091,35,0*5C
$GLGSV,3,1,09,83,68,250,32,68,63,299,42,67,44,039,34,82,34,182,18,1*7C
$GLGSV,3,2,09,84,26,329,17,69,19,255,26,77,17,084,,76,13,032,31,1*7D
$GLGSV,3,3,09,78,01,131,,1*4C
$GAGSV,2,1,07,08,80,037,41,13,70,210,44,07,44,239,,26,39,311,,0*75
$GAGSV,2,2,07,03,26,054,36,15,25,158,,25,04,062,,0*48
$GNGLL,4313.6314,N,08154.9043,W,173125.000,A,D*50
$GPTXT,01,01,02,ANTSTATUS=OK*3B
pi@openplotter:~ $ 

Did you want me to reboot to see if I can get it to loose connection again and then run the terminal command?

Shortly after I ran the terminal cmd I lost GPS data in OpenCPN.

Here is the terminal info after I lost gps

pi@openplotter:~ $ head -n 50 /dev/moitessier.tty
$GNRMC,173559.000,A,4313.6314,N,08154.9043,W,0.00,100.81,151020,,,D,V*1D
$GPVTG,100.81,T,,M,0.00,N,0.00,K,D*30
$GPGGA,173559.000,4313.6314,N,08154.9043,W,2,21,0.59,189.2,M,-34.7,M,,*52
$GNGSA,A,3,29,23,24,18,27,10,15,13,20,,,,1.01,0.59,0.83,1*03
$GNGSA,A,3,68,83,67,77,84,69,82,76,,,,,1.01,0.59,0.83,2*09
$GNGSA,A,3,13,03,15,08,,,,,,,,,1.01,0.59,0.83,3*09
$GPGSV,3,1,11,18,81,211,43,15,62,057,48,20,59,303,47,23,56,300,48,0*6C
$GPGSV,3,2,11,24,35,140,46,44,29,225,35,13,28,048,23,10,28,284,44,0*6B
$GPGSV,3,3,11,27,18,313,35,29,09,194,22,05,03,092,22,0*5D
$GLGSV,3,1,09,83,67,242,29,68,64,306,42,67,41,042,30,82,30,182,16,1*7D
$GLGSV,3,2,09,84,28,327,28,69,21,258,37,77,19,081,18,76,12,029,31,1*7E
$GLGSV,3,3,09,78,03,129,,1*47
$GAGSV,2,1,07,08,78,038,44,13,68,207,45,07,45,241,,26,41,309,,0*7E
$GAGSV,2,2,07,03,25,055,32,15,23,159,36,25,05,061,,0*4E
$GNGLL,4313.6314,N,08154.9043,W,173559.000,A,D*5F
$GPTXT,01,01,02,ANTSTATUS=OK*3B
$GNRMC,173600.000,A,4313.6314,N,08154.9043,W,0.00,100.81,151020,,,D,V*12
$GPVTG,100.81,T,,M,0.00,N,0.00,K,D*30
$GPGGA,173600.000,4313.6314,N,08154.9043,W,2,21,0.59,189.2,M,-34.7,M,,*5D
$GNGSA,A,3,29,23,24,18,27,10,15,13,20,,,,1.01,0.59,0.83,1*03
$GNGSA,A,3,68,83,67,77,84,69,82,76,,,,,1.01,0.59,0.83,2*09
$GNGSA,A,3,13,03,15,08,,,,,,,,,1.01,0.59,0.83,3*09
$GPGSV,3,1,11,18,81,211,43,15,62,057,48,20,59,303,47,23,56,300,48,0*6C
$GPGSV,3,2,11,24,35,140,46,44,29,225,36,13,28,048,23,10,28,284,44,0*68
$GPGSV,3,3,11,27,18,313,35,29,09,194,18,05,03,092,22,0*54
$GLGSV,3,1,09,83,67,242,29,68,64,306,42,67,41,042,31,82,30,182,18,1*72
$GLGSV,3,2,09,84,28,327,28,69,21,258,37,77,19,081,18,76,12,029,31,1*7E
$GLGSV,3,3,09,78,03,129,,1*47
$GAGSV,2,1,07,08,78,038,44,13,68,207,45,07,45,241,,26,41,309,,0*7E
$GAGSV,2,2,07,03,25,055,32,15,23,159,36,25,05,061,,0*4E
$GNGLL,4313.6314,N,08154.9043,W,173600.000,A,D*50
$GPTXT,01,01,02,ANTSTATUS=OK*3B
$GNRMC,173601.000,A,4313.6314,N,08154.9043,W,0.00,100.81,151020,,,D,V*13
$GPVTG,100.81,T,,M,0.00,N,0.00,K,D*30
$GPGGA,173601.000,4313.6314,N,08154.9043,W,2,21,0.59,189.2,M,-34.7,M,,*5C
$GNGSA,A,3,29,23,24,18,27,10,15,13,20,,,,1.01,0.59,0.83,1*03
$GNGSA,A,3,68,83,67,77,84,69,82,76,,,,,1.01,0.59,0.83,2*09
$GNGSA,A,3,13,03,15,08,,,,,,,,,1.01,0.59,0.83,3*09
$GPGSV,3,1,11,18,81,211,43,15,62,057,48,20,59,303,47,23,56,300,48,0*6C
$GPGSV,3,2,11,24,35,140,46,44,29,225,35,13,28,048,23,10,28,284,44,0*6B
$GPGSV,3,3,11,27,18,313,35,29,09,194,20,05,03,092,25,0*58
$GLGSV,3,1,09,83,67,242,29,68,64,306,42,67,41,042,32,82,30,182,18,1*71
$GLGSV,3,2,09,84,28,327,28,69,21,258,37,77,19,081,18,76,12,029,31,1*7E
$GLGSV,3,3,09,78,03,129,,1*47
$GAGSV,2,1,07,08,78,038,44,13,68,207,45,07,45,241,,26,41,309,,0*7E
$GAGSV,2,2,07,03,25,055,32,15,23,159,36,25,05,061,,0*4E
$GNGLL,4313.6314,N,08154.9043,W,173601.000,A,D*51
$GPTXT,01,01,02,ANTSTATUS=OK*3B
$GNRMC,173602.000,A,4313.6314,N,08154.9043,W,0.00,100.81,151020,,,D,V*10
$GPVTG,100.81,T,,M,0.00,N,0.00,K,D*30
pi@openplotter:~ $

There are no noticeable errors in the signalk data browser
Reply


Messages In This Thread
RE: Moitessier Hat and signal K not connecting consistently - by rastam4n - 2020-10-15, 06:33 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)