2020-10-14, 03:11 PM
(2020-10-12, 10:44 PM)seandepagnier Wrote: Does the older tinypilot image work on the same hardware?
It should support pi 0, 1, 2, 3
What errors? Can you md5sum the extracted image?
MD5 sum : 69d4c8706c920e15e476c8499005a875
Errors shown in attached picture.
This is on an Raspberry Pi 2, without WiFi adapter.
I have tried a 32GB and a 16GB card, same errors on both.
I have also tried to write the image with 3 different programs, BalenaEtcher, Win32DiskImager, and RaspberryPi imager.
Also tried the same on a RPi3+, but hangs on boot.
I tried some of the older images - same problem.
And tried to write the image using another computer.
I also tested piCore 9.0.3 - this works on Rpi2, but hangs on Rpi3+.
I am not sure what to try next - i do not want to buy a Pi Zero.
Maybe use a Pi4 with Raspbian, and install pypilot..
I do want to have the autopilot on a dedicated Pi.