I think I have found the bug, that line in config.txt needs a new line after and right now the script is not adding it.
This will be fixed in the next release next days.
when only this line is defined in config.txt the default pin is GPIO 04:
If you want to set a different pin, for example GPIO 06, this line should be:
Try to manually add an empty line after this, reboot and check if it works.
some advices:
We use BCM to name pins in code: https://pinout.xyz
Do not forget to add the resistor:
This will be fixed in the next release next days.
when only this line is defined in config.txt the default pin is GPIO 04:
Code:
dtoverlay=w1-gpio
If you want to set a different pin, for example GPIO 06, this line should be:
Code:
dtoverlay=w1-gpio,gpiopin=6
Try to manually add an empty line after this, reboot and check if it works.
some advices:
We use BCM to name pins in code: https://pinout.xyz
Do not forget to add the resistor: