2020-11-05, 12:59 PM
(2020-11-05, 08:03 AM)Andreas29 Wrote: Hi,
don´t know how you now connected the two devices.
A popular mistake ist to connect tx with tx and rx with rx on both sides but you have to connect tx with rx and rx with tx. Also you need to have the same GND for both devices.
Regards
Andreas
Thanks Andreas.
I followed Sean's instructions to the letter See: https://i.imgur.com/2jbn5CV.png.
So the threads are not reversed. I just hope the controller isn't faulty.
I await instructions from Sean, also to understand what to do. Let's hope!

