2020-11-10, 01:44 PM
Hello Sean,
I made the change, nothing moved. I replaced all the USB0 references by AMA0 in the program nothing changes. It fails to connect to the controller, here is the end of the message:
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 10 of 10: not in sync: resp = 0x00
make: *** [Makefile:76: upload] Error 1
I made the change, nothing moved. I replaced all the USB0 references by AMA0 in the program nothing changes. It fails to connect to the controller, here is the end of the message:
avrdude: stk500_recv (): programmer is not responding
avrdude: stk500_getsync () attempt 10 of 10: not in sync: resp = 0x00
make: *** [Makefile:76: upload] Error 1