This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How do I get 4G dongle working?
#2
Put your SIM card into an Smart-Phone, if there ist an PIN active on the Card, disable it.
Try again in your Huawei Stick. Or try the Huawei Stick on your Computer to diable the PIN.

The eth1 Connection from the Huawei is the normal Behavior.
I got the same for my old Config with these Sticks. But now i use the SIM inside an little cheap Router with wlan&ethernet
to do the Boat-Accespoint. This is faster and stays online for other Devices even if the pi reboots. This is more stable for me, if the raspi has to do both: AP and Client on his internal wlan - things get an little instable over the time.
If you have to do this, put in another wifi-usb-stick to connect and share your harbour-networks.

You will like the comfort of an dedicated Router for your Network....

Good Luck, Holger
Reply


Messages In This Thread
How do I get 4G dongle working? - by Blue Ocean - 2020-11-05, 04:37 PM
RE: How do I get 4G dongle working? - by holgerw - 2020-11-07, 09:41 PM
RE: How do I get 4G dongle working? - by tkurki - 2020-11-08, 07:35 PM
RE: How do I get 4G dongle working? - by holgerw - 2020-11-08, 08:09 PM
RE: How do I get 4G dongle working? - by holgerw - 2020-11-09, 05:14 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)