2021-01-01, 06:27 PM
(This post was last modified: 2021-01-05, 09:48 PM by CaptnBry.
Edit Reason: Answered
)
Hello ESP32 experienced person(s),
The ESP8266 with the Arduino IDE is very attractive for this OP hobbyist-Old sailor.
Can you recommend a "Hello World" level Thread or Tutorial just to send an NMEA0183 Sentence in text to the RPi Signalk, and have it displayed as say, depth?
My intention is to set-up the programming and interfacing via WiFi in compliance with Signalk/OpenPlotter for eventually adding ESP8266-to-WiFi-NMEA0183 sensors to the yacht.
A simplified set-up and test scenario would be of great help. (hopefully for Others too)
Thanks in advance for your insight,
Cheers
UPDATE, Answered:
https://github.com/SignalK/SensESP/tree/...emperature
has excellent detail sufficient to Get Started with PlatformIO
A similarly detailed Arduino IDE example is yet to be identified here
Its important to find a tutorial and the SAME BOARD, some ESP8266 clones don't have a usb interface or bootloaders.
Great help here thanks !
The ESP8266 with the Arduino IDE is very attractive for this OP hobbyist-Old sailor.
Can you recommend a "Hello World" level Thread or Tutorial just to send an NMEA0183 Sentence in text to the RPi Signalk, and have it displayed as say, depth?
My intention is to set-up the programming and interfacing via WiFi in compliance with Signalk/OpenPlotter for eventually adding ESP8266-to-WiFi-NMEA0183 sensors to the yacht.
A simplified set-up and test scenario would be of great help. (hopefully for Others too)
Thanks in advance for your insight,
Cheers
UPDATE, Answered:
https://github.com/SignalK/SensESP/tree/...emperature
has excellent detail sufficient to Get Started with PlatformIO
A similarly detailed Arduino IDE example is yet to be identified here
Its important to find a tutorial and the SAME BOARD, some ESP8266 clones don't have a usb interface or bootloaders.
Great help here thanks !