This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Signal K issue
#3
(2020-12-27, 08:17 PM)tkurki Wrote: Outputting data seems to be real stumbling block. I tried to make things a little clearer: https://github.com/SignalK/signalk-serve...tting-Data.

There's also https://github.com/SignalK/signalk-serve...-Questions

Tks for the links it's useful and help a lot to understant.

I have been able to plug my USB RS 422 device to feed the VHF radio first with OpenCPN and finlaly with Signal K also

With Signal K i did :
  • Enable convert signal K to NMEA0183 plugin, check GGA
  • New serial connection with  Data type : NMEA, Output Events : nmea0183out
The red led of the USB device is blinking and the VHF get the signal properly, so evrything is fine.
Reply


Messages In This Thread
Signal K issue - by topodom - 2020-12-27, 06:52 PM
RE: Signal K issue - by tkurki - 2020-12-27, 08:17 PM
RE: Signal K issue - by topodom - 2020-12-27, 09:30 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)