2021-01-19, 01:31 AM
Hi
I am running a RPI4 + the latest version of OP2. I have a Moitessier 1 HAT. I recently did the install (like in the last week) and everything worked fine. Have this set up on my boat with canable to a N2K Raymarine network. All conversion from and to N2K was working fine and I could see the Raymarine GPS and the Moitessier GPS in the SK data browser. I started playing around with setting source priorities and after that I noticed that the Moitessier GPS stopped working properly - it started sending through null data for the GPS. I ran the self test and that was all ok. All the other data from the Moitessier is coming through ok. I ran moitessier.tty and get the responses listed below. Would appreciate any advice on what else i can look at to get this going. I am currently out sailing in the Bay of Islands NZ and it would be useful to have this working!
Thanks in advance.
Dave
pi@openplotter:~ $ head -n 50 /dev/moitessier.tty
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004326.878,,,,,0,0,,,M,,M,,*4C
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004326.878,V,N*7E
$GPTXT,01,01,02,ANTSTATUS=OK*3B
$GPRMC,004327.878,V,,,,,0.00,0.00,060180,,,N,V*3D
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004327.878,,,,,0,0,,,M,,M,,*4D
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004327.878,V,N*7F
$GPTXT,01,01,02,ANTSTATUS=OK*3B
$GPRMC,004328.878,V,,,,,0.00,0.00,060180,,,N,V*32
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004328.878,,,,,0,0,,,M,,M,,*42
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004328.878,V,N*70
$GPTXT,01,01,02,ANTSTATUS=OK*3B
$GPRMC,004329.878,V,,,,,0.00,0.00,060180,,,N,V*33
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004329.878,,,,,0,0,,,M,,M,,*43
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004329.878,V,N*71
$GPTXT,01,01,02,ANTSTATUS=OK*3B
$GPRMC,004330.878,V,,,,,0.00,0.00,060180,,,N,V*3B
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004330.878,,,,,0,0,,,M,,M,,*4B
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
I am running a RPI4 + the latest version of OP2. I have a Moitessier 1 HAT. I recently did the install (like in the last week) and everything worked fine. Have this set up on my boat with canable to a N2K Raymarine network. All conversion from and to N2K was working fine and I could see the Raymarine GPS and the Moitessier GPS in the SK data browser. I started playing around with setting source priorities and after that I noticed that the Moitessier GPS stopped working properly - it started sending through null data for the GPS. I ran the self test and that was all ok. All the other data from the Moitessier is coming through ok. I ran moitessier.tty and get the responses listed below. Would appreciate any advice on what else i can look at to get this going. I am currently out sailing in the Bay of Islands NZ and it would be useful to have this working!
Thanks in advance.
Dave
pi@openplotter:~ $ head -n 50 /dev/moitessier.tty
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004326.878,,,,,0,0,,,M,,M,,*4C
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004326.878,V,N*7E
$GPTXT,01,01,02,ANTSTATUS=OK*3B
$GPRMC,004327.878,V,,,,,0.00,0.00,060180,,,N,V*3D
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004327.878,,,,,0,0,,,M,,M,,*4D
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004327.878,V,N*7F
$GPTXT,01,01,02,ANTSTATUS=OK*3B
$GPRMC,004328.878,V,,,,,0.00,0.00,060180,,,N,V*32
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004328.878,,,,,0,0,,,M,,M,,*42
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004328.878,V,N*70
$GPTXT,01,01,02,ANTSTATUS=OK*3B
$GPRMC,004329.878,V,,,,,0.00,0.00,060180,,,N,V*33
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004329.878,,,,,0,0,,,M,,M,,*43
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004329.878,V,N*71
$GPTXT,01,01,02,ANTSTATUS=OK*3B
$GPRMC,004330.878,V,,,,,0.00,0.00,060180,,,N,V*3B
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004330.878,,,,,0,0,,,M,,M,,*4B
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65