2021-02-01, 03:05 PM
Ok, have fixed it for anyone wondering.
I am using a compute module and I had to change the GPIO mode to BCM mode in the python script for the mode.
Then, instead of selecting the pins in the GUI of node-red, I had to manually fill in the PIN numbers.
Be carefull though, if possible test the output first by running gpio allreadall
In my case, this fixed it.
I am using a compute module and I had to change the GPIO mode to BCM mode in the python script for the mode.
Then, instead of selecting the pins in the GUI of node-red, I had to manually fill in the PIN numbers.
Be carefull though, if possible test the output first by running gpio allreadall
In my case, this fixed it.