2021-01-28, 11:04 AM
hello steph,
as you are using signalk like me, there is no really usefull function left for kplex....
... even in the 1 version of openplotter this kplex had given me an bagfull off errors. these days this prog
was the first to check. lost its settings, refused to work etc etc....
since that i use signalk for all intercommunication work. and it is stable, one it is configured right.
example gps:
alias the usb-serial to xxx_gps in op-serial and make only one connection to gpsd (under the hood this will also connect gpsd to signalk automatically via network)
thats all.
if you need to forward the gps-nema do it inside signalk (udp-forward plugin is one choice here, but usb-serial is another choice)
as you are using signalk like me, there is no really usefull function left for kplex....
... even in the 1 version of openplotter this kplex had given me an bagfull off errors. these days this prog
was the first to check. lost its settings, refused to work etc etc....
since that i use signalk for all intercommunication work. and it is stable, one it is configured right.
example gps:
alias the usb-serial to xxx_gps in op-serial and make only one connection to gpsd (under the hood this will also connect gpsd to signalk automatically via network)
thats all.
if you need to forward the gps-nema do it inside signalk (udp-forward plugin is one choice here, but usb-serial is another choice)