2021-04-16, 08:48 PM
I really think you just wired it wrong. Please read:
https://pypilot.org/schematics/hbridge_datasheet.htm
You have combination #3 the third column of serial data connections
This combinations is the most confusing because black is 3v3 and blue is gnd. You can see this from the wires on the motor controller itself.
https://pypilot.org/schematics/hbridge_datasheet.htm
You have combination #3 the third column of serial data connections
This combinations is the most confusing because black is 3v3 and blue is gnd. You can see this from the wires on the motor controller itself.