2021-05-13, 05:04 AM
(2021-05-04, 10:48 PM)Techstyle Wrote: I would go back now and reconstruct you OpenCPN connection:Agree with this. Output connection is really only needed for external routing or an auto pilot. I include XTE in mi e also along with RMC. If you’re just sending info to OpenCPN, this isn’t needed.
Below is how I have mine connected
1 and 3 were correct:
Quote:1- Network - TCP
Localhost
Data Port 10110
Priority 1
Control Check Sum - selected
Receive Input on this port - selected
Output on this port - not selected
3- Network - UDP
Localhost
Data Port 10119
Comment - OpencpnOUT
Priority 1
Control Check Sum - selected
Receive Input on this port - not selected
Output on this port - selected
Input Filtering- Accept only Sentences - selected
Out Filtering - Transmit Sentences -RMB,APB
Do not do 2. I add XTE to the transmit sentence, but it is buried elsewhere
In SignalK
Quote:OpencpnOUT
NMEA0183
NMEA 0183 Source - UDP
Port 10119
Sentence Event N- nmea0183out
Validate Checksum - yes
Ignore Sentences RMB, APB
leave sentence event blank for now and don't ignore the only sentences being sent by OpenCPN!