2021-05-03, 07:28 PM
You can do it with micro usb or through wifi.
The question is, if the usb device you plugged into the pi is recognized, and it may even need to edit the udev rules.
So, ssh into tinypilot and run "dmesg | tail" after plugging into micro usb port and see what the result is.
Also, yes it only works at 4800 and 38400 baud normally.
The question is, if the usb device you plugged into the pi is recognized, and it may even need to edit the udev rules.
So, ssh into tinypilot and run "dmesg | tail" after plugging into micro usb port and see what the result is.
Also, yes it only works at 4800 and 38400 baud normally.