2021-05-04, 09:24 PM
HI again,
this is what I got:
tc@box:~$ dmesg | tail
[ 2397.012416] usb 1-1: new full-speed USB device number 4 using dwc_otg
[ 2397.012752] Indeed it is in host mode hprt0 = 00021501
[ 2397.248187] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
[ 2397.248202] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2397.248209] usb 1-1: Product: FT232R USB UART
[ 2397.248216] usb 1-1: Manufacturer: FTDI
[ 2397.248222] usb 1-1: SerialNumber: A601SDDE
[ 2397.251468] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 2397.251682] usb 1-1: Detected FT232RL
[ 2397.252784] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
tc@box:~$
I guess it is just some definition that has to be changed?
The nmea test tool on the PC reads wind data, true and apparent. RAW data coming from the converter in wind mode:
$SDMDA,,I,,B,,C,9.8,C,,,,,,T,7.5,M,5.7,N,2.9,M*44
$WIMWV,7.5,R,2.9,M,A*29
$WIVWR,7.5,R,5.7,N,2.9,M,10.5,K*68
$WIMWD,,T,7.5,M,5.7,N,2.9,M*7F
$SDMDA,,I,,B,,C,9.8,C,,,,,,T,7.5,M,5.7,N,2.9,M*44
$WIMWV,7.5,R,2.9,M,A*29
$WIVWR,7.5,R,5.7,N,2.9,M,10.5,K*68
$WIMWD,,T,10.0,M,5.9,N,3.0,M*4A
$SDMDA,,I,,B,,C,9.8,C,,,,,,T,10.0,M,5.9,N,3.0,M*71
$WIMWV,10.0,R,3.0,M,A*12
$WIVWR,10.0,R,5.9,N,3.0,M,10.9,K*51
$WIMWD,,T,10.0,M,5.9,N,3.0,M*4A
$SDMDA,,I,,B,,C,9.8,C,,,,,,T,10.0,M,5.9,N,3.0,M*71
$WIMWV,10.0,R,3.0,M,A*12
$WIVWR,10.0,R,5.9,N,3.0,M,10.9,K*51
$WIMWD,,T,10.0,M,5.9,N,3.0,M*4A
Thanks!
//Fabian
this is what I got:
tc@box:~$ dmesg | tail
[ 2397.012416] usb 1-1: new full-speed USB device number 4 using dwc_otg
[ 2397.012752] Indeed it is in host mode hprt0 = 00021501
[ 2397.248187] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
[ 2397.248202] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2397.248209] usb 1-1: Product: FT232R USB UART
[ 2397.248216] usb 1-1: Manufacturer: FTDI
[ 2397.248222] usb 1-1: SerialNumber: A601SDDE
[ 2397.251468] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 2397.251682] usb 1-1: Detected FT232RL
[ 2397.252784] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
tc@box:~$
I guess it is just some definition that has to be changed?
The nmea test tool on the PC reads wind data, true and apparent. RAW data coming from the converter in wind mode:
$SDMDA,,I,,B,,C,9.8,C,,,,,,T,7.5,M,5.7,N,2.9,M*44
$WIMWV,7.5,R,2.9,M,A*29
$WIVWR,7.5,R,5.7,N,2.9,M,10.5,K*68
$WIMWD,,T,7.5,M,5.7,N,2.9,M*7F
$SDMDA,,I,,B,,C,9.8,C,,,,,,T,7.5,M,5.7,N,2.9,M*44
$WIMWV,7.5,R,2.9,M,A*29
$WIVWR,7.5,R,5.7,N,2.9,M,10.5,K*68
$WIMWD,,T,10.0,M,5.9,N,3.0,M*4A
$SDMDA,,I,,B,,C,9.8,C,,,,,,T,10.0,M,5.9,N,3.0,M*71
$WIMWV,10.0,R,3.0,M,A*12
$WIVWR,10.0,R,5.9,N,3.0,M,10.9,K*51
$WIMWD,,T,10.0,M,5.9,N,3.0,M*4A
$SDMDA,,I,,B,,C,9.8,C,,,,,,T,10.0,M,5.9,N,3.0,M*71
$WIMWV,10.0,R,3.0,M,A*12
$WIVWR,10.0,R,5.9,N,3.0,M,10.9,K*51
$WIMWD,,T,10.0,M,5.9,N,3.0,M*4A
Thanks!
//Fabian