2021-06-08, 07:08 AM
No A is engage and disengage, M is Menu and select.
In the menu A is straight all the way back to home, so if you are lost in the menu and want do a correction you only have to push A once.
In the menu the arrows are up and down.
Green led means engaged, green led blinking means Tack mode.
Red led and buzzer we want to use for errors. now it turns on when you push a button and you hear a beep from the buzzer.
In Standby you can keep the arrows pressed the drive will move progressively.
In Auto /Engaged the arrows will do 1 degree with single push if you keep it pressed it wil do 5 then 10 and 10 till 100 degrees, at every step the red led will blink and the buzzer will beep.
In the menu A is straight all the way back to home, so if you are lost in the menu and want do a correction you only have to push A once.
In the menu the arrows are up and down.
Green led means engaged, green led blinking means Tack mode.
Red led and buzzer we want to use for errors. now it turns on when you push a button and you hear a beep from the buzzer.
In Standby you can keep the arrows pressed the drive will move progressively.
In Auto /Engaged the arrows will do 1 degree with single push if you keep it pressed it wil do 5 then 10 and 10 till 100 degrees, at every step the red led will blink and the buzzer will beep.