2021-09-16, 05:07 AM
I dont know about integrating in the menu, sorry. Hopefully that works in the future. You can simply run the pypilot commands eg:
pypilot_control.
As far as flashing in a different way. It's really difficult to say but it is most likely either
1) another process is accessing the spi port.
2) screen connection is faulty (nokia5110 is bad for this) try pushing on the metal frame and see if anything changes
pypilot_control.
As far as flashing in a different way. It's really difficult to say but it is most likely either
1) another process is accessing the spi port.
2) screen connection is faulty (nokia5110 is bad for this) try pushing on the metal frame and see if anything changes