2021-11-05, 12:33 AM
The pypilot hat uses the i2c, spi, and uart pins. The others are optional but serve other functions. Check the schematic
https://pypilot.org/schematics/pypilot_tinypilot.pdf
It is not usually possible to stack arbitrary hats on a raspberry pi. Another option would be to use a separate pi zero w for pypilot and have it networked to another raspberry pi with your other hat.
https://pypilot.org/schematics/pypilot_tinypilot.pdf
It is not usually possible to stack arbitrary hats on a raspberry pi. Another option would be to use a separate pi zero w for pypilot and have it networked to another raspberry pi with your other hat.