2023-04-24, 01:43 PM
As far as I can detect, if you send a stream of NMEA 183 data to the Stowe displays (that I have) they will each pick up the NMEA sentences that are relevant. That is, the Wind display should display the relevant wind NMEA sentences and so on. If you can see the NMEA data in OpenCpn debug window being output to a usb to NMEA converter and then connect that to a display you can check what is going on. On my boat the displays are daisy chained together and each display picks up the data relevant to it from the output of the Databox. If you are just sending similar NMEA from OpenCpn I assume the displays should work but I have not tried it.
The Depth Sounder display may be a problem as the Databox sends the pings to the transducer and converts the returns to NMEA so you will need to get a NMEA depth below transducer sentence to send to the depth display.
Jodel
The Depth Sounder display may be a problem as the Databox sends the pings to the transducer and converts the returns to NMEA so you will need to get a NMEA depth below transducer sentence to send to the depth display.
Jodel