2022-01-01, 11:56 PM
This is data that is coming in wirelessly, and originated from an NMEA2000 bus, which isn't directly readable as ASCII strings.
The debug display in OpenCPN has been pretty reliable in the past at displaying incoming NMEA0183 strings. Unfortunately, there isn't a way in OpenCPN to display incoming SignalK, but the data display on the SignalK server is showing the correct data.
Somehow, this is just a case of SignalK not outputting the AIS strings on the NMEA0183 TCP port. It's a little weird, as prior to this I was using an NMEA0183 AIS receiver, and the strings were coming in and going out of the SignalK server just fine.
The debug display in OpenCPN has been pretty reliable in the past at displaying incoming NMEA0183 strings. Unfortunately, there isn't a way in OpenCPN to display incoming SignalK, but the data display on the SignalK server is showing the correct data.
Somehow, this is just a case of SignalK not outputting the AIS strings on the NMEA0183 TCP port. It's a little weird, as prior to this I was using an NMEA0183 AIS receiver, and the strings were coming in and going out of the SignalK server just fine.