2022-01-11, 01:51 PM
(2022-01-11, 10:01 AM)yvereg Wrote:(2022-01-10, 07:07 PM)PaddyB Wrote:(2022-01-10, 01:51 PM)yvereg Wrote: Thanks for your answers. I confirm:
-the automatic server search in opencpn is off
-my user belongs to dialout group
regards
Does tcp port 10.10.10.1 port 10110 work as a connection in opencpn (Try with no other connections) ? Signalk should be sending out nmea0183 on that port.
Hello,
At the installation time of openplotter this connection is declared:
network/input/signalk/openplotter.local/3000 I do not understand the aim of this connection.
As you suggest I enter a connection declared:
network/input/tcp/openplotter.local/10110, unfortunatly no gps messages are received in opencpn.
does such command correct to display what is output of signalK?
cat </dev/tcp/10.10.10.1/10110
if the answer is yes, no messages are displayed meaning nothing is output from signalk
Regards
Use the Serial application of OpenPlotter and see if the connection appears. If the connection appears. Give this app an alias (name0.
Accept and then to connections in the same application. Choose Signalk give the right baudrate and then the Signalk server restarts (take some time).D
Then it must work.
The working of the signaK server can be seen with the application SignalK diagnostics.