2022-01-26, 04:46 PM
You can connect the two most easily with wifi. From there you can use nmea on port 20220. signalk is supposed to work automatically but you have to grant write access to pypilot from the signalk control panel (in a web browser)
It does not exactly send waypoints over signalk at this time though. In fact pypilot does not care about waypoints; it only cares about the bearing to use which is in the nmea APB message.
It does not exactly send waypoints over signalk at this time though. In fact pypilot does not care about waypoints; it only cares about the bearing to use which is in the nmea APB message.