2022-05-28, 04:30 PM
No matter what I try, it just doesn't work!
I can't use the autopilot plug in as it's only Seatalk1 so I am using the nmea0183: input. It worked fine last year and I am now using the settings from then. The laptop running Opencpn failed so I am now using a Windows 11 Dell Inspiron.
It doesn't even work connecting the autopilot to the Dell so with no openplotter.
Using the pi, I can get a waypoint number that increases every second by 2. Eg 8815 8817 etc, and it restarts at 8899 to 8801.
The debug log says it is sending data for APB and RMB.
Not sure what to change. I am wondering if the raymarine autopilot has a fault.
I can't use the autopilot plug in as it's only Seatalk1 so I am using the nmea0183: input. It worked fine last year and I am now using the settings from then. The laptop running Opencpn failed so I am now using a Windows 11 Dell Inspiron.
It doesn't even work connecting the autopilot to the Dell so with no openplotter.
Using the pi, I can get a waypoint number that increases every second by 2. Eg 8815 8817 etc, and it restarts at 8899 to 8801.
The debug log says it is sending data for APB and RMB.
Not sure what to change. I am wondering if the raymarine autopilot has a fault.