Seriell 2.2.3 New Device Problem

[Slin_Slin]

If you can not edit openplotter.conf file is because now the owner is the root user or it is corrupted. Try to make the user pi the owner again.

Hi Sailoog, thanks for the input. Now I know the "Debugging mode". 

I fixed it with:

Code:

sudo chown -R pi:pi /home/pi

But the Settings Tool "Check System" has now this error:

Code:

The access request must be aproved with read/write permission in Signal K administrator.

Ps: I have no new Access Requests in SignalK.