2022-08-31, 10:39 PM
(This post was last modified: 2022-08-31, 10:40 PM by seandepagnier.)
I finally managed to replicate some of the issues and wanted to post instructions for installing pypilot on openplotter3. Eventually the commands listed below will be integrated into openplotter eliminating this step, but for now:
git clone https://github.com/pypilot/openplotter-pypilot
cd openplotter-pypilot
sudo python3 setup.py install
openplotter-pypilot
If there are errors, post them, and also try "update" under reinstall to ensure it completes.
You will want to enable i2c in raspbi-config as well as the hardware serial port in most cases.
Please try this and post any issues so the scripts can be updated and improved.
git clone https://github.com/pypilot/openplotter-pypilot
cd openplotter-pypilot
sudo python3 setup.py install
openplotter-pypilot
If there are errors, post them, and also try "update" under reinstall to ensure it completes.
You will want to enable i2c in raspbi-config as well as the hardware serial port in most cases.
Please try this and post any issues so the scripts can be updated and improved.