2022-10-15, 05:23 AM
Hello,
It's a bit tricky to read, but the driver is listed towards the end of the hat.conf file. If you read from the end of the file backwards, then you'll see the following tags:
"arduino":{"device":"\/dev\/spidev0.1","resetpin":16,"hardware":0.26},"lirc":"gpio4"}
"lcd":{"driver":"jlx12864","port":"\/dev\/spidev0.0"}
Just swap the "jlx12864" for "nokia5110" and you should be golden. Mine now looks like this:
"lcd":{"driver":"nokia5110","port":"\/dev\/spidev0.0"}
Best of luck!
It's a bit tricky to read, but the driver is listed towards the end of the hat.conf file. If you read from the end of the file backwards, then you'll see the following tags:
"arduino":{"device":"\/dev\/spidev0.1","resetpin":16,"hardware":0.26},"lirc":"gpio4"}
"lcd":{"driver":"jlx12864","port":"\/dev\/spidev0.0"}
Just swap the "jlx12864" for "nokia5110" and you should be golden. Mine now looks like this:
"lcd":{"driver":"nokia5110","port":"\/dev\/spidev0.0"}
Best of luck!