2022-10-18, 11:22 PM
(2022-10-08, 02:35 PM)Sailoog Wrote: We have ported all the sensor supported in OpenPlotter 2 to OpenPlotter 3 and added a few more.
Signal K server communication has been improved. UDP connections are no longer used, now sensors send data by websockets.
An important new feature has been added, now you can multiplex sensors using multiple TCA9548A modules. This means that your sensors can share addresses: https://learn.adafruit.com/working-with-...2c-devices
This is the list of supported sensors and the implementation status:
INA219 (bus voltage, shunt voltage, current, power)
Status : Implemented and tested
Multiplexing: not tested yet
INA260 (voltage, current, power)
Status : Implemented but not tested yet
Multiplexing: not tested yet
BH1750 (illuminance)
Status : Implemented and tested
Multiplexing: not tested yet
BME680/688 (pressure, temperature, humidity, gas)
Status : Implemented and tested
Multiplexing: not tested yet
BME280 (pressure, temperature, humidity)
Status : Implemented and tested
Multiplexing: not tested yet
BMP280 (pressure, temperature)
Status : Implemented but not tested yet
Multiplexing: not tested yet
BMP3XX (pressure, temperature)
Status : Implemented but not tested yet
Multiplexing: not tested yet
BMP085/180 (pressure, temperature)
Status : Not implemented and deprecated
Multiplexing: incompatible
HTU21D (temperature, humidity)
Status : Implemented and tested
Multiplexing: not tested yet
LPS3X (pressure, temperature)
Status : Implemented but not tested yet
Multiplexing: not tested yet
MS5607-02BA03 (temperature, humidity)
Status : Implemented and tested
Multiplexing: incompatible
ADS1115 (analog to digital conversion)
Status : Not mplemented yet
Multiplexing: Not implemented yet
ADS1015 (analog to digital conversion)
Status : Not mplemented yet
Multiplexing: Not implemented yet
Please test and report here as usual. I will update this post with your feedback. If you have any issue or something does not work as expected, follow these steps before reporting:
- Go to OpenPlotter-Settings-System log and click "Debugging mode"
- Go to Accessories-Terminal
- Type openplotter-i2c and press enter
- Add your sensors and copy here any error message in the terminal
Enjoy
I followed your instructions exactly, I am enjoying.
Thank you for all of your work!
There is a dialog box in the edit function of I2C 3.1.0 sensor editor. titled "Settings".
There are columns titled "Sensor Settings" and "Magnitude Settings" obviously tied together. I assume they are for setting gain and things like that.
What is the syntax for using these options? Are there any examples?
Also
Working on installing a multiplexor.
Will let you know how things go.
Will be able to test with BPE688, INA218 and ADS115 (when available).
TIA