2023-02-02, 04:45 PM
After a few days it happenned again ! CpU load exceed 25% (1 core fully occupied) and OpenCPN out of control.
I could visuatyze that thanks to a smartphone application Rapcontroler, very usefull indeed ! When things have calmed down, I de-activated in OpenCPN the connection to SignalK, and, as by a miracle, the troubles were gone : no more hangup, easy panning and zooming, and activating the options didn't freeze OpenCPN neither !
I know disconnecting from SignalK is not a respectable solution, but it give a good clue where to investigate more in deep , isn't it ?
I could visuatyze that thanks to a smartphone application Rapcontroler, very usefull indeed ! When things have calmed down, I de-activated in OpenCPN the connection to SignalK, and, as by a miracle, the troubles were gone : no more hangup, easy panning and zooming, and activating the options didn't freeze OpenCPN neither !
I know disconnecting from SignalK is not a respectable solution, but it give a good clue where to investigate more in deep , isn't it ?
Cordialement
Didier B
Pi4, SSD USB3, OP 3.0 Touch SK 3.2.1 OpenCPN 5.8.4 : Thank you Thank you Thank you
Didier B
Pi4, SSD USB3, OP 3.0 Touch SK 3.2.1 OpenCPN 5.8.4 : Thank you Thank you Thank you